myStudio

myStudio video tutorial

1 Original intention of myStudio

myStudio is a one-stop platform for using robots such as myRobot/myCobot.
It is convenient for users to select different firmware and download them according to their own usage scenarios, and at the same time learn related teaching materials and browse tutorial videos online.

2 Latest version of myStudio and supported platforms

Latest version: V3.5.8
Applicable to: Windows, Mac, Linux

3 myStudio functions

Burn and update firmware
Provide robot tutorials, such as user manuals, video tutorials, Q&A, etc.
Information on maintenance and repairs

4 Applicable devices for myStudio

myCobot 280
myCobot 280 M5
myCobot 280 PI
myCobot 280 Jetson Nano
myCobot 280 for Arduino

5 Firmware version recommendation

Different models of robotic arms require different firmware to be burned. The following are the firmware versions recommended for burning different models of robotic arms.

myCobot 280 series

The myCobot 280 series has 4 versions: M5 version, PI version, ardunio version and jetsonnano version. Different versions have different core models, and the firmware and versions required to be burned are also different.

Robot version number	Core	Required firmware to be burned	Recommended firmware and version
M5 version	M5Stack-Basic	miniRobot firmware	Recommended to burn v2.1 version, you can use drag teaching, wifi, Bluetooth and other functions
M5 version	Atom	atomMain firmware	For products with serial numbers ER28001202200415 and earlier, or products without serial numbers, it is recommended to burn v4.1; for products with serial numbers ER28001202200416 and later, it is recommended to burn v5.1
PI version	RaspberryPI 4B	ubuntu firmware	Recommend burning V18.04. version
PI version	Atom	atomMain firmware	For products with serial numbers ER28001202200415 and earlier, or products without serial numbers, it is recommended to burn v4.1; for products with serial numbers ER28001202200416 and later, it is recommended to burn v5.1
Arduino version	mega2560	transponder firmware	Recommend burning v1.0 version
	mkrwifi1010	transponder firmware	Recommend burning v1.0 version
	Atom	atomMain firmware	For products with serial numbers of ER28001202200415 and earlier, or products without serial numbers, it is recommended to burn v4.1; for products with serial numbers of ER28001202200416 and later, it is recommended to burn v5.1
Jetson nano version	JestonNano	ubuntu firmware	Recommend burning V18.04. version
Jetson nano version	Atom	atomMain firmware	For products with serial numbers of ER28001202200415 and earlier, or products without serial numbers, it is recommended to burn v4.1; for products with serial numbers of ER28001202200416 and later, it is recommended to burn v5.1

myStudio environment setup

myStudio download and installation

Note: The installation path of myStudio cannot have any spaces

Download address:

1. GitHub address

After entering the download address, click myStudio on the right and select the corresponding version to download.

Different suffixes represent different systems, please download the corresponding version:
*.tra.xz —— Linux system
*.dmg —— Mac system
*.exe —— Window system

2. Official website address

You can download it according to your computer system.

Note: Please download the latest version. You can view the current version in the downloaded myStudio interface and update to the latest version.

Install the driver

Users can click the button below to download the corresponding CP210X or CP34X driver package according to their operating system. After decompressing the package, select the installation package corresponding to the operating system bit number for installation.

There are currently two driver chip versions, CP210X (for CP2104 version) and CP34X (for CH9102 version) driver compression packages. If you are not sure which USB chip your device uses, you can install both drivers at the same time. ( CH9102_VCP_SER_MacOS may show an error during installation, but it has actually been installed, so just ignore it.)

For Mac OS, make sure the system "Preferences->Security and Privacy->General" is set before installation, and allow downloads from the App Store and approved developers.