Demonstration code

The following are various use cases and operation result videos. You can copy the code for use or modification (the robot arm model used in the following cases is MyCobot 280. The parameters of different series of robot arms are different. Please pay attention to the modification).

Note: The corresponding baud rates of various devices are different. Please refer to the information to understand their baud rates when using them. The serial port number can be viewed through Calculator Device Manager or the serial port assistant.

Control RGB light board

myCobot

from pymycobot.mycobot import MyCobot

from pymycobot import PI_PORT, PI_BAUD      # When using the Raspberry Pi version of mycobot, you can refer to these two variables to initialize MyCobot, if not, you can omit this line of code
import time
#The above needs to be written at the beginning of the code, which means importing the project package

# MyCobot class initialization requires two parameters:
#   The first is the serial port string, such as:
#       linux: "/dev/ttyUSB0"
#          or "/dev/ttyAMA0"
#       windows: "COM3"
#   The second is the baud rate:
#       M5 version is: 115200
#
#    Example:
#       mycobot-M5:
#           linux:
#              mc = MyCobot("/dev/ttyUSB0", 115200)
#          or mc = MyCobot("/dev/ttyAMA0", 115200)
#           windows:
#              mc = MyCobot("COM3", 115200)
#       mycobot-raspi:
#           mc = MyCobot(PI_PORT, PI_BAUD)
#
# Initialize a MyCobot object
# Create object code here for windows version
mc = MyCobot("COM3", 115200)

i = 7
#loop 7 times
while i > 0:                            
    mc.set_color(0,0,255) #blue light on
    time.sleep(2)    #wait for 2 seconds                
    mc.set_color(255,0,0) #red light on
    time.sleep(2)    #wait for 2 seconds
    mc.set_color(0,255,0) #green light on
    time.sleep(2)    #wait for 2 seconds
    i -= 1

Control the machine to return to the origin

from pymycobot.mycobot import MyCobot
from pymycobot import PI_PORT, PI_BAUD      # When using the Raspberry Pi version of mycobot, you can refer to these two variables to initialize MyCobot

# MyCobot class initialization requires two parameters:
#   The first is the serial port string, such as:
#       linux: "/dev/ttyUSB0"
#          or "/dev/ttyAMA0"
#       windows: "COM3"
#   The second is the baud rate:
#       M5 version is: 115200
#
#    Example:
#       mycobot-M5:
#           linux:
#              mc = MyCobot("/dev/ttyUSB0", 115200)
#          or mc = MyCobot("/dev/ttyAMA0", 115200)
#           windows:
#              mc = MyCobot("COM3", 115200)
#       mycobot-raspi:
#           mc = MyCobot(PI_PORT, PI_BAUD)
#
# Initialize a MyCobot object
# Create object code here for Raspberry Pi version
mc = MyCobot(PI_PORT, PI_BAUD)

# Check whether the program can be burned into the robot arm
if mc.is_controller_connected() != 1:
    print("Please connect the robot arm correctly for program writing")
    exit(0)

# Fine-tune the robotic arm to ensure that all the bayonets are aligned in the adjusted position
# Subject to the alignment of the mechanical arm bayonet, this is only a case
mc.send_angles([0, 0, 0, 0, 0, 0], 30)

# To calibrate the position at this time, the calibrated angular position represents [0,0,0,0,0,0], and the potential value represents [2048,2048,2048,2048,2048,2048]
# The for loop is equivalent to the method set_gripper_ini()
#for i in range(1, 7):
    #mc.set_servo_calibration(i)

Single joint movement

from pymycobot.mycobot import MyCobot
from pymycobot.genre import Angle
import time

# MyCobot class initialization requires two parameters:
#   The first is the serial port string, such as:
#       linux: "/dev/ttyUSB0"
#          or "/dev/ttyAMA0"
#       windows: "COM3"
#   The second is the baud rate:
#       M5 version is: 115200
#
#    Example:
#       mycobot-M5:
#           linux:
#              mc = MyCobot("/dev/ttyUSB0", 115200)
#          or mc = MyCobot("/dev/ttyAMA0", 115200)
#           windows:
#              mc = MyCobot("COM3", 115200)
#       mycobot-raspi:
#           mc = MyCobot(PI_PORT, PI_BAUD)
#
# Initialize a MyCobot object
# Create object code for Raspberry Pi
# mc = MyCobot(PI_PORT, PI_BAUD)
# Create object code for M5
mc=MyCobot('COM3',115200)

# Robotic arm recovery
mc.send_angles([0, 0, 0, 0, 0, 0], 40)
time.sleep(3)

# Control joint 3 to move 70°
mc.send_angle(Angle.J3.value,70,40)
time.sleep(3)

# Control joint 4 movement -70°
mc.send_angle(Angle.J4.value,-70,40)
time.sleep(3)

# Control joint 1 to move 90°
mc.send_angle(Angle.J1.value,90,40)
time.sleep(3)

# Control joint 5 movement -90°
mc.send_angle(Angle.J5.value,-90,40)
time.sleep(3)

# Control joint 5 to move 90°
mc.send_angle(Angle.J5.value,90,40)
time.sleep(3)

Multi-joint exercise

import time
from pymycobot import MyCobot
# MyCobot class initialization requires two parameters:
#   The first is the serial port string, such as:
#       linux: "/dev/ttyUSB0"
#          or "/dev/ttyAMA0"
#       windows: "COM3"
#   The second is the baud rate::
#       M5 version is: 115200
#
#    Example:
#       mycobot-M5:
#           linux:
#              mc = MyCobot("/dev/ttyUSB0", 115200)
#          or mc = MyCobot("/dev/ttyAMA0", 115200)
#           windows:
#              mc = MyCobot("COM3", 115200)
#       mycobot-raspi:
#           mc = MyCobot(PI_PORT, PI_BAUD)
#
# Initialize a MyCobot object
# Create object code for Raspberry Pi
# mc = MyCobot(PI_PORT, PI_BAUD)
# Create object code for M5
mc=MyCobot('COM3',115200)

# Robotic arm recovery
mc.send_angles([0, 0, 0, 0, 0, 0], 50)
time.sleep(2.5)

# Control different angles of rotation of multiple joints
mc.send_angles([90,45,-90,90,-90,90],50)
time.sleep(2.5)

# Return the robotic arm to zero
mc.send_angles([0,0,0,0,0,0],50)
time.sleep(2.5)

# Control different angles of rotation of multiple joints
mc.send_angles([-90,-45,90,-90,90,-90],50)
time.sleep(2.5)

Control the robot arm to swing left and right

from pymycobot.mycobot import MyCobot
from pymycobot.genre import Angle
from pymycobot import PI_PORT, PI_BAUD  # When using the Raspberry Pi version of mycobot, these two variables can be referenced to initialize MyCobot
import time

# Initialize a MyCobot object
mc = MyCobot("COM3", 115200)
# Get the coordinates of the current location
angle_datas = mc.get_angles()
print(angle_datas)


#By passing the angle parameter, let each joint of the robotic arm move to the position
mc.send_angles([0, 0, 0, 0, 0, 0], 50)
print(mc.is_paused())
# Set the waiting time to ensure that the robotic arm has reached the specified position
# while not mc.is_paused():
time.sleep(2.5)

# Move joint 1 to the 90 position
mc.send_angle(Angle.J1.value, 90, 50)

# Set the waiting time to ensure that the robotic arm has reached the specified position
time.sleep(2)

# set loop times
num = 5

# The following code can make the robotic arm swing left and right
while num > 0:
    # Move joint 2 to the 50 position
    mc.send_angle(Angle.J2.value, 50, 50)

    # Set the waiting time to ensure that the robotic arm has reached the specified position
    time.sleep(1.5)

    # Move joint 2 to the -50 position
    mc.send_angle(Angle.J2.value, -50, 50)

    # Set the waiting time to ensure that the robotic arm has reached the specified position
    time.sleep(1.5)

    num -= 1

#  Make the robotic arm retract. You can manually swing the robotic arm, and then use the get_angles() function to get the coordinate sequence, use this function to let the robotic arm reach the position you want.
mc.send_angles([88.68, -138.51, 155.65, -128.05, -9.93, -15.29], 50)

# Set the waiting time to ensure that the robotic arm has reached the specified position
time.sleep(2.5)

# Let the robotic arm relax, you can manually swing the robotic arm
mc.release_all_servos()

Controlling the robotic arm to dances

from pymycobot.mycobot import MyCobot
from pymycobot import PI_PORT, PI_BAUD  # When using the Raspberry Pi version of mycobot, these two variables can be referenced to initialize MyCobot
import time

if __name__ == "__main__":
    # MyCobot class initialization requires two parameters:
    #   The first is the serial port string, such as:
    #       linux: "/dev/ttyUSB0"
    #          or "/dev/ttyAMA0"
    #       windows: "COM3"
    #   The second is the baud rate::
    #       M5 version is: 115200
    #
    #    such as:
    #       mycobot-M5:
    #           linux:
    #              mc = MyCobot("/dev/ttyUSB0", 115200)
    #          or mc = MyCobot("/dev/ttyAMA0", 115200)
    #           windows:
    #              mc = MyCobot("COM3", 115200)
    #       mycobot-raspi:
    #           mc = MyCobot(PI_PORT, PI_BAUD)
    #
    # Initialize a MyCobot object
    # Create object code for Raspberry Pi version below
    mc = MyCobot(PI_PORT, PI_BAUD)

    # set start start time
    start = time.time()
    # Let the robotic arm reach the specified position
    mc.send_angles([-1.49, 115, -153.45, 30, -33.42, 137.9], 80)
    # Determine if it reaches the specified position
    while not mc.is_in_position([-1.49, 115, -153.45, 30, -33.42, 137.9], 0):
        # Return the robotic arm to motion
        mc.resume()
        # Let the robotic arm move for 0.5s
        time.sleep(0.5)
        # Pause arm movement
        mc.pause()
        # Determine if the move timed out
        if time.time() - start > 3:
            break

    # set start time
    start = time.time()
    # Let the exercise last for 30 seconds
    while time.time() - start < 30:
        # Let the robotic arm quickly reach this position
        mc.send_angles([-1.49, 115, -153.45, 30, -33.42, 137.9], 80)
        # Set the color of the light to [0,0,50]
        mc.set_color(0, 0, 50)
        time.sleep(0.7)
        # Let the robotic arm quickly reach this position
        mc.send_angles([-1.49, 55, -153.45, 80, 33.42, 137.9], 80)
        # Set the color of the light to [0,50,0]
        mc.set_color(0, 50, 0)
        time.sleep(0.7)

Gripper control

from pymycobot.mycobot import MyCobot
from pymycobot import PI_PORT, PI_BAUD  # When using the Raspberry Pi version of mycobot, these two variables can be referenced to initialize MyCobot
import time
def gripper_test(mc):
    print("Start check IO part of api\n")
    # Check if the gripper is moving
    flag = mc.is_gripper_moving()
    print("Is gripper moving: {}".format(flag))
    time.sleep(1)

    # Set the current position to (2048).
    # Use it when you are sure you need it.
    # Gripper has been initialized for a long time. Generally, there
    # is no need to change the method.
    # mc.set_gripper_ini()
    # Set joint point 1 to rotate to the position of 2048
    mc.set_encoder(1, 2048)
    time.sleep(2)

    # Set six joint positions and let the robotic arm rotate to this position at a speed of 20
    mc.set_encoders([1024, 1024, 1024, 1024, 1024, 1024], 20)
    time.sleep(3)

    #Get the position information of joint point 1
    print(mc.get_encoder(1))
    # Set the gripper to rotate to the position of 2048
    mc.set_encoder(7, 2048)
    time.sleep(3)
    # Set the gripper to rotate to the position of 1300
    mc.set_encoder(7, 1300)
    time.sleep(3)

    # Let the gripper reach the state of 2048 at a speed of 70, 2048 will report an error, so change it to 255
    mc.set_gripper_value(255, 70)
    time.sleep(3)
    # Let the gripper reach the state of 1500 at a speed of 70, 1500 will report an error, so change it to 255
    mc.set_gripper_value(255, 70)
    time.sleep(3)


    num=5
    while num>0:
        # Set the state of the gripper to quickly open the gripper at a speed of 70
        mc.set_gripper_state(0, 70)
        time.sleep(3)
        # Set the state of the gripper to quickly close the gripper at a speed of 70
        mc.set_gripper_state(1, 70)
        time.sleep(3)
        num-=1

    # Get the value of the gripper
    print("")
    print(mc.get_gripper_value())

if __name__ == "__main__":
    # MyCobot class initialization requires two parameters:
    #   The first is the serial port string, such as:
    #       linux: "/dev/ttyUSB0"
    #          or "/dev/ttyAMA0"
    #       windows: "COM3"
    #   The second is the baud rate::
    #       M5 version is: 115200
    #
    #    such as:
    #       mycobot-M5:
    #           linux:
    #              mc = MyCobot("/dev/ttyUSB0", 115200)
    #          or mc = MyCobot("/dev/ttyAMA0", 115200)
    #           windows:
    #              mc = MyCobot("COM3", 115200)
    #       mycobot-raspi:
    #           mc = MyCobot(PI_PORT, PI_BAUD)
    #
    # Initialize a MyCobot object
    # Create object code for Raspberry Pi version below
    mc = MyCobot(PI_PORT, PI_BAUD)
    # make it move to zero position
    mc.set_encoders([2048, 2048, 2048, 2048, 2048, 2048], 20)
    time.sleep(3)
    gripper_test(mc)

Suction pump control

from pymycobot.mycobot import MyCobot
from pymycobot import PI_PORT, PI_BAUD  # When using the Raspberry Pi version of mycobot, these two variables can be referenced to initialize MyCobot
import time

# MyCobot class initialization requires two parameters:
#   The first is the serial port string, such as:
#       linux: "/dev/ttyUSB0"
#          or "/dev/ttyAMA0"
#       windows: "COM3"
#   The second is the baud rate::
#       M5 version is: 115200
#
#    such as:
#       mycobot-M5:
#           linux:
#              mc = MyCobot("/dev/ttyUSB0", 115200)
#          or mc = MyCobot("/dev/ttyAMA0", 115200)
#           windows:
#              mc = MyCobot("COM3", 115200)
#       mycobot-raspi:
#           mc = MyCobot(PI_PORT, PI_BAUD)
#
# Initialize a MyCobot object
# Create object code here for windows version
mc = MyCobot("COM3", 115200)

# The position of the robot arm movement
angles = [
            [92.9, -10.1, -60, 5.8, -2.02, -37.7],
            [92.9, -53.7, -83.05, 50.09, -0.43, -38.75],
            [92.9, -10.1, -87.27, 5.8, -2.02, -37.7]
         ]

# Turn on the suction pump
def pump_on():
    # make position 2 work
    mc.set_basic_output(2, 0)
    # make position 5 work
    mc.set_basic_output(5, 0)

# stop the suction pump
def pump_off():
    # Stop position 2 from working
    mc.set_basic_output(2, 1)
    # Stop position 5 from working
    mc.set_basic_output(5, 1)

# Robotic arm recovery
mc.send_angles([0, 0, 0, 0, 0, 0], 30)
time.sleep(3)

# Turn on the suction pump
pump_on()
mc.send_angles(angles[2], 30)
time.sleep(2)

# absorb small blocks
mc.send_angles(angles[1], 30)
time.sleep(2)
mc.send_angles(angles[0], 30)
time.sleep(2)
mc.send_angles(angles[1], 30)
time.sleep(2)

# Turn off the suction pump
pump_off()
mc.send_angles(angles[0], 40)
time.sleep(1.5)

results matching ""

    No results matching ""