Flash firmware
How do I use myStudio to flash firmware
Open myStudio, select the machine as
myAGV 2023 for Jetson Nano, and wait for the USB port to be recognized successfully
Click to LOGIN
Click Basic to enter the Basic page
Click to download firmware
Click to flash
Burn successfully
FAQ
Q：How to verify if the firmware was successfully burned?
- A：As shown in the following figure, if a successful burning prompt appears, it may not necessarily be successful. If the machine can control and use the firmware normally after burning, it is considered successful.
Q：How to handle burning failure?
A：
You can try burning more times
Check if there are any errors during the burning process. If there are any errors, please provide feedback to the after-sales service
Use Cutecom to check if the machine's serial port is working properly. Under normal circumstances, the serial port will return data. If it is not normal, please restart the machine
Q：After burning the firmware, the machine is out of control?
- A：If the machine becomes uncontrollable after burning the firmware, you can try burning it multiple times. If it cannot be resolved, please contact after-sales service.