<<<<<<< HEAD
Burning
This chapter describes how to use the programming function of the built-in software, which is mainly used to update the firmware version.
Step 1: Select Flash and click OK to enter the burning interface.
Step 2: Press the A button to prepare for burning. The machine will reboot within a period of time, during which the pico firmware will be burned, note that the pico firmware will start when the flash is pressed.
Step 3: Press the C key to exit this function.
← Previous page | Next Section →
烧录
本章介绍如何使用内置软件的烧录功能，主要用于更新固件版本。
Step 1: 选中Flash点击OK进入烧录界面。
Step 2: 按下A键，准备烧录。机器会在一段时间内重启，在此时间内烧录pico固件，注意在Flash按下的时候开始进行pico固件烧录。
Step 3: 按下C键，退出此功能。
2350f0e86e2352fe2e8fb62592247280afec2c2d