<<<<<<< HEAD
Status information
This chapter describes how to check the status of a device using basic software. Please make sure that both the software version and firmware version of the device remain unchanged (factory default version) before use. If you make any modifications to the software or firmware, ensure that your operation meets the requirements listed in this chapter.
At present, the information that can be viewed is divided into motor connection status and the built-in firmware version number of the robotic arm.
Step 1: Select Information and click OK to enter the status information interface.
Step 2: Press the A key to start connection detection. The screen shows the motor connection status.
Step 3: Press the B key to start detecting the version information, and the screen will display the firmware version.
Step 4: Press the C key to exit this function.
← Previous page | Next Section →
状态信息
本章介绍如何使用基本软件检查设备状态。使用前请确保设备的软件版本和固件版本均保持不变（出厂默认版本）。如果您对软件或固件进行了任何修改，请确保您的操作符合本章中列出的要求。
目前，支持查看的信息分为电机连接状态以及机械臂内置固件版本号。
Step 1: 选中Information点击OK进入状态信息界面。
Step 2: 按下A键，开始连接检测。屏幕显示电机连接状态。
Step 3: 按下B键，开始检测版本信息，屏幕显示固件版本。
Step 4: 按下C键，退出此功能。
2350f0e86e2352fe2e8fb62592247280afec2c2d