PC Control

1 Connecting PC and mechanical arm

  • As shown in the figure, connect the PC with the serial port cable provided.

  • As shown in the figure, use the serial port cable provided to connect the mechanical arm

<<<<<<< HEAD

2 View serial port

======= 提示:在进行固件烧录之前,请先按下烧录按钮,若不按下按钮,会导致固件烧录失败

烧录按钮如图所示

2 查看串口

482c782c42e70f0b2e44445345f6461e795f9189

  • After connecting the mechanical arm with the serial port
  • Right click "This computer", select "Management", select "System Tools ->Device Manager"
  • Click "Port (COM and LPT)" to view the serial port number of the mechanical arm. It can be seen that the serial port number of the mechanical arm is "COM3"

3 Simple control

  • After connecting the mechanical arm successfully, double click to open myBlockly programming software
  • Drag the building block to program as follows.

  • Click "Run" to control the movement of the mechanical arm

results matching ""

    No results matching ""